';

CMI4 Series

Metallized polypropilene film single phase motor capacitors

, CMI4 Series, Meco Capacitors

GENERAL INFORMATION – The capacitors generally defined as motor capacitors are used for the start up and running of single-phase induction 2 and 3 windings motors. The capacitance of these capacitors (permanent connection) must be carefully established to avoid possible overheating of the auxiliary winding.

CONSTRUCTION PECULIARITIES – For the construction of these capacitors a polypropylene film dielectric is used, metallised in high  vacuum, self-healing that allows the obtaining of capacitive units with very low losses and reduced overall dimensions. These elements are subsequently encapsulated in plastic case and then incorporated in resin.

Caratteristiche Tecniche
Technical details		 
Tolleranza capacità
Capacitance tolerance		±5%
Tensione nominale
Rated voltage		450 Vac
Frequenza nominale
Rated frequency		50/60 Hz
Angolo di perdita
Loss angle		tanδ ≤ 20 x 10-4 (Vn - 50Hz)
Temperatura di lavoro
Operating temperature		-25°C +85°C
Categoria climatica
Climatic category		25/85/21
Tensione di prova
Test voltage		tra le armature: 2 Vn x 2”
between terminals: 2 Vn x 2”
verso Massa: 3000 Vac x 2”
between terminals and case: 3000 Vac x 2”
Resistenza isolamento
Insulation resistance		104 MΩ x μF
Certificazioni
Approvals		IMQ
Norma di riferimento
Reference standard		EN60252-1
Classe funzionamento
Application class		B=10.000 h
Grado di protezione
Protection degree		IP00
Classe di sicurezza
Security class		S0
Contenitore e coperchio
Case and cover		in materiale plastico autoestinguente grado V2 secondo UL94
in self-extinguishing plastic material grade V2 in according to UL94
Temperatura di stoccaggio
Storage temperature		-40°C +85°C

WARNINGS

Improper use of the capacitor such as, for example, applications that involve exceeding the capacities and/or characteristics reported on a given capacitor, it can cause an irreversible breakdown and/or breakage that can occur with the explosion of capacitor or with a deterioration such as to manifest loss of capacity, increase of power factor and permanent circuit interruption. MECO S.r.l. declines any responsibility for damage to the condenser, to persons or things deriving from improper or incorrect use of their products.
RoHS Directive MECO condensers are in line with the European directive 2002/95/EC already known as RoHS directive.
    logo