';

CMS5 SERIES

Metallized polypropilene film single phase motor capacitors

, CMS5 Series, Meco Capacitors

GENERAL INFORMATION
The capacitors generally defined as motor capacitors are used for the start up and running
of single-phase induction 2 and 3 windings motors.
The capacitance of these capacitors (permanent connection) must be carefully established
to avoid possible overheating of the auxiliary winding.
Construction peculiarities
For the construction of these capacitors a polypropylene film dielectric is used, metallised in a vacuum,
self-healing that allows the obtaining of capacitive units with very low losses and reduced
overall dimensions.
These elements are subsequently encapsulated in metal case and then incorporated in resin.
The CMS5 series capacitors are extremely safe and reliable and which metal case fitting allow to be
equipped with an overpressure safety device. This is a construction system which allows to deactivate
the capacitor immediately in case of an accidental internal fault. For example when a permanent short
circuit occurs (continuous regeneration of the dielectric of the capacitive element) the current generated
causes the decomposition of the dielectric through combustion with the consequent development of gas.
Under the pressure created the upper part of the case is strained so that one of the feeding conductors
breaks and the capacitor is deactivated.


Caratteristiche tecniche
Tecnical details
Tolleranza capacità
Capacitance tolerance
±5%
Tensione nominale
Rated voltage
450 Vac
Frequenza nominale
Rated frequency
50/60 Hz
Angolo di perdita
Loss angle
tan∂ ≤20 •10-4
(Vn - 50 Hz)
Temperatura di lavoro
Operating temperature
-40°C +85°C
Categoria climatica
Climatic category
40/85/21
Tensione di prova

Test voltage
tra le armature: 2 Vn x 2”
verso massa: 3000Vac x 2"
between terminals: 2 Vn x 2"
between terminals and case: 3000Vac x 2"
Resistenza isolamento
Insulation resistance
104 MΩ • μF
Norma di riferimento
Reference standard
EN60252-1
Classe funzionamento
Application class
B=10.000 h
Grado di protezione
Protection degree
IP00
Classe di sicurezza
Security class
S2
Contenitore
Case
Alluminio con dispositivo di sicurezza
Aluminium with safety device
Piastrina
Cover
In plastica autoestinguente Classe V0 secondo UL94
Self-estinguishing plastic V0 Class as UL94
Temperatura di stoccaggio
Storage temperature
-40°C +85°C

WARNINGS

Improper use of the capacitor such as, for example, applications that involve exceeding the capacities and/or characteristics reported on a given capacitor, can cause an irreversible breakdown and/or breakage that can occur with the explosion of capacitor or with a deterioration such as to manifest loss of capacity, increase of power factor and permanent circuit interruption. Meco Capacitors declines any responsibility for damage to the capacitors, to persons or things deriving from improper or incorrect use of their products.
RoHS Directive
MECO Capacitors products are in line with the European directive 2002/95/EC already known as RoHS directive.