, CMA3 Series, Meco Capacitors

CMA 3 SERIES

Triphase modular capacitors

The complete range of three-phase capacitors in robust steel cases in order to guarantee a better internal heat dissipation.
All capacitors inside the module are equipped with discharge resistor and overpressure safety device that, in the event of the element failing, disconnects it fromthe power circuit, ensuring the maximum safety in every application.


Caratteristiche tecniche
Technical details
Tolleranza
Tolerance
-5 % / +10 %
Tensione nominale
Rated Voltage (Un)
230 – 400 – 415 – 440 – 480 – 525 V
Frequenza
Rated Frequency
50 Hz (60 Hz a richiesta
On demand)
Temperatura d'esercizio
Operating temperature
Classe D -25°C / +55°C - Classe C -25°C / +50°C
Perdite dielettriche
Dielectric losses
≤0,2W/kVar
Perdite totali al terminale
Total losses at the terminals
≤0,5W/kVar
Corrente massima
Max current
1,5 In
Tensione di isolamento
Insulation voltage
3/15kV Ue = 690 Vac
Massimo valore di cresta del transitorio di corrente
Maximum peak value of the current transient
≤200 In
Prova di tensione tra i terminali
Voltage test between the terminals
2,15 Un for 2”
Prova di Tensione tra i terminali e la custodia
Voltage test between the terminals and case
3,6 KV for 10”
Resistenza di scarica interna
Internal discharge resistor
Riduzione a 75 V in 3 minuti
Reduction to 75 V within 3 minutes
Terninali
Terminals
Viti M8
M8 Screws
Servizio
Service
Continuo
Continuous
Installazione
Installation
Interno
Internal
Raffreddamento
Cooling
Aria naturale
Natural air
Umidità massima
Max permissibile humidity
80%
Altitudine
Altitude
≤2000 ( m a.s.l.)
Grado di protezione
Degree of protection
IP 40 (con coperchio di protezione/
With protection cover)
Aspettativa di vita
Expected life
>130.000 h (classe D) - >150.000 h (classe C)
Fissaggio
Fixing
Viti M6
M6 screw
Norme di riferimento
Reference Standards
CEI EN 60831-1/2,
IEC 60831- 1/2
Numero di inserzioni
Number of switching operations
Max 5000/anno secondo IEC 60831-1/2
5000 per year according to IEC 60831-1/2

WARNINGS

Improper use of the capacitor such as, for example, applications that involve exceeding the capacities and/or characteristics reported on a given capacitor, can cause an irreversible breakdown and/or breakage that can occur with the explosion of capacitor or with a deterioration such as to manifest loss of capacity, increase of power factor and permanent circuit interruption. Meco Capacitors declines any responsibility for damage to the capacitors, to persons or things deriving from improper or incorrect use of their products.
RoHS Directive
MECO Capacitors products are in line with the European directive 2002/95/EC already known as RoHS directive.